eSIMs for 190+ countries Top-ups to 100+ countries QR delivered by email in minutes Secure checkout with Visa, Mastercard, Apple & Google Pay Real support on WhatsApp
Home / Guides / eSIM installed but no internet: fix it in minutes

eSIM installed but no internet: fix it in minutes

Last checked: 19 November 2026

An installed eSIM gives no internet until the phone actually uses it for mobile data and data roaming is switched on for that line. The usual cause is that mobile data is still set to the home SIM, or roaming is off for the eSIM. Both are fixed in the phone settings in under a minute.

eSIM installed but no internet: why it happens

Scanning the QR code only installs the eSIM on the phone; it does not switch it on. The eSIM gives no internet until the phone uses it for mobile data and data roaming is on for it. That is why a freshly installed eSIM often looks dead while the home SIM keeps working normally.

The two most common causes, in order:

  1. Mobile data is still set to the home SIM, so the phone never sends traffic through the eSIM.
  2. Data roaming is off for the eSIM line. A travel eSIM always connects as a roaming line, even in the country it was bought for, so roaming must be on for that line.

Less common causes are the eSIM line being switched off in the phone settings, Allow Mobile Data Switching moving data back to the home SIM on iPhone, a missing APN, a phone locked to one network, or a plan whose data is used up or has ended.

If you have not installed the eSIM yet, the step by step is in install eSIM on iPhone and Android.

Fix it on iPhone in 3 steps

On iPhone, three settings decide whether the eSIM has internet: the eSIM must be chosen for Mobile Data, Data Roaming must be on for the eSIM line, and Turn On This Line must be on. Allow Mobile Data Switching should be off so the phone does not move data back to the home SIM.

Step 1, choose the eSIM for internet: Settings, then Mobile Service (Cellular in US English), then Mobile Data, and pick the new eSIM line.

Step 2, turn on roaming for the eSIM: Settings, then Mobile Service, tap the eSIM line, and switch on Data Roaming.

Step 3, check the line itself is on: Settings, then Mobile Service, tap the eSIM line, and make sure Turn On This Line is switched on.

Then check Allow Mobile Data Switching under Settings, then Mobile Service, then Mobile Data, and switch it off for a travel eSIM.

After the changes, turn Airplane mode on, wait about 10 seconds, then turn it off so the phone searches for a network again. Restarting the phone has the same effect. When it works, the phone shows 4G or 5G next to the eSIM line, usually within a minute or two. More detail for Apple phones is in activate eSIM on iPhone.

Fix it on Samsung and other Android phones

On Samsung Galaxy phones, choose the eSIM for internet in Settings, then Connections, then SIM manager, then Mobile data, and pick the eSIM. Then turn on roaming in Settings, then Connections, then Mobile networks, and switch on Data roaming.

On Google Pixel phones, open Settings, then Network and internet, then SIMs, choose the eSIM, switch on Mobile data and switch on Roaming.

If the eSIM is not connecting on Android, work through this list:

  • Confirm the eSIM is selected as the SIM for mobile data, not the home SIM.
  • Confirm Data roaming is on for the eSIM line.
  • Confirm the eSIM line is enabled in SIM manager.
  • Toggle Airplane mode on for about 10 seconds and off again, or restart the phone.
  • Check the APN if the plan needs one (see the next section).

The network is chosen automatically and cannot be picked by hand, so there is no network list to select from.

Bars but no internet: APN and roaming

If the phone shows bars but no internet, the usual cause is the APN or data roaming. Some plans need an APN, and the APN for a Slashtel eSIM is shown in the order email when the plan needs one.

On iPhone the APN goes in Settings, then Mobile Service, the eSIM line, then Mobile Data Network. On Android it goes in Settings, then Connections, then Mobile networks, then Access Point Names.

Enter it exactly as written in the order email, save, then toggle Airplane mode on and off. Full field by field instructions are in eSIM APN settings.

Roaming is the other half. A travel eSIM always connects as a roaming line, so eSIM data roaming must be on for the eSIM line even in the country the plan was bought for. Leave data roaming off on the home SIM, so the home network cannot charge roaming fees, while it stays on for the eSIM.

No Service: when it is normal and when it is not

An eSIM installed at home shows No Service or Activating until the traveller arrives in the destination. This is normal and the eSIM must not be deleted.

Deleting an installed eSIM removes it for good. The QR code works only once, so a deleted eSIM cannot be added again from the same code. If the eSIM shows No Service at home, leave it alone and switch it on when you land.

If the phone shows No Service in the destination, the usual cause is the line being off or the phone not yet having searched for a network. Check that Turn On This Line is on (iPhone) or the eSIM is enabled in SIM manager (Android), then toggle Airplane mode or restart.

Two other checks: the phone must be unlocked and eSIM compatible, because a phone locked to one network can refuse a travel eSIM. And the eSIM not working can simply mean the phone has not found a network yet, so give it a minute or two after landing.

Data used up or plan ended

If the plan's data is used up or the plan has ended, the eSIM stops giving internet. More data can be added to the same eSIM without a new QR code.

So before you reinstall anything, check the plan status. A working eSIM that suddenly loses internet mid trip is often out of data rather than misconfigured.

Validity starts when the eSIM first connects at the destination, so a plan bought and installed at home before the flight is not running down while you wait. That also means an eSIM installed days early is not the reason for no internet at home.

Keep your home number working while you use eSIM data

Slashtel eSIMs are data only: no local phone number and no calls or SMS. WhatsApp and other internet calls work over the data, while calls and texts, including bank codes, keep arriving on the home SIM.

Keep the home SIM in the phone for calls and bank codes, and turn off data roaming on it to avoid roaming charges. With a data-only eSIM, WhatsApp, maps and apps work over the eSIM data while the home SIM handles calls and texts. The full setup is in calls, texts and OTPs with a data eSIM.

If the home line is prepaid and needs to stay active for those codes, Slashtel also sells mobile top ups to more than 100 countries, delivered in minutes. See top up.

Buying is online with an email address and a card, Apple Pay or Google Pay, and the QR code arrives by email within minutes. Someone else can buy the eSIM and enter the traveller's email, so the QR code goes straight to the person who will use it. Plans are listed by country under destinations.

Still not working: what to send support

If none of the steps work, Slashtel support on WhatsApp or email can check whether the eSIM is installed and whether it has connected, using the order reference. Support runs 7 days a week.

Send:

  • The order reference.
  • The phone model.
  • What the phone shows next to the eSIM line: bars with 4G or 5G, No Service, or Activating.
  • Which settings you already changed: mobile data line, data roaming, APN.

Do not delete the eSIM while waiting for a reply. A deleted eSIM cannot be reinstalled from the same QR code, and that turns a settings problem into a lost plan.

More detail is in our full eSIM install guide.

Sources

Checked 19 November 2026. Rules and dates can change, so check the official pages before you rely on them.

Questions, answered

Why does my eSIM show installed but no internet?

The QR code only installs the eSIM. It gives no internet until the phone uses it for mobile data and data roaming is on for that line. The most common cause is mobile data still set to the home SIM, and the second is roaming off for the eSIM.

How do I switch mobile data to eSIM on iPhone?

Go to Settings, then Mobile Service (Cellular in US English), then Mobile Data, and pick the new eSIM line. Then tap the eSIM line and switch on Data Roaming and Turn On This Line. Switch off Allow Mobile Data Switching so data does not move back to the home SIM.

My eSIM is not connecting on Android. What should I check?

On Samsung Galaxy, pick the eSIM in Settings, then Connections, then SIM manager, then Mobile data, and switch on Data roaming under Settings, then Connections, then Mobile networks. On Google Pixel, open Settings, then Network and internet, then SIMs, choose the eSIM, switch on Mobile data and Roaming.

Do I need eSIM data roaming on in the country I am visiting?

Yes. A travel eSIM always connects as a roaming line, even in the country it was bought for, so data roaming must be on for the eSIM line. Leave roaming off on the home SIM so the home network cannot charge roaming fees.

Why does my eSIM show No Service?

At home it is normal: an eSIM installed before travel shows No Service or Activating until you arrive in the destination, and it must not be deleted. In the destination, check the line is switched on, then toggle Airplane mode or restart the phone so it searches for a network.

How do I activate a travel eSIM?

Install it from the QR code, choose it for mobile data, switch on data roaming for that line, then toggle Airplane mode on and off. Validity starts when the eSIM first connects at the destination, so it can be installed at home before the flight.

The phone shows bars but no internet. What is wrong?

Usually the APN or data roaming. Some plans need an APN, which is shown in the order email when the plan needs one. Enter it in the eSIM line's APN settings, save, then toggle Airplane mode.

Can I delete and reinstall the eSIM to fix it?

No. Deleting an installed eSIM removes it for good, and the QR code works only once, so a deleted eSIM cannot be added again from the same code. Fix settings instead, or contact support with your order reference.

Why did my eSIM stop working after a few days?

If the plan's data is used up or the plan has ended, the eSIM stops giving internet. More data can be added to the same eSIM without a new QR code, so check the plan status before changing any settings.

Will my bank codes still arrive while I use eSIM data?

Yes. Slashtel eSIMs are data only, with no local number and no calls or SMS. Keep the home SIM in the phone with data roaming off, and calls and texts, including bank codes, arrive on the home SIM while apps use the eSIM data.

See eSIM plans by country →

Keep reading

Guides

Browse